Through our design, the efficiency of the construction team has been significantly enhanced, boosting their work speed by 3 to 4 times.

Removable wing plates (size extension)

Requirement: Rock dimensions may exceed 1,500mm, requiring temporary platform enlargement.

Solution: Two 200mm wide removable wing plates (screw‑fixed) are added on the long and short sides of each platform. With wing plates installed, the platform size becomes 1,700×1,700 mm. The wing plates are removed when not needed, so they do not interfere with forklift access.

Advantage: One machine handles both standard and oversized rock blocks.

Forklift loading/unloading (rectangular tube guides)

Desafio: Forklift forks must slide under the platform to place the rock. A solid platform base blocks the forks.

Solution: Two removable rectangular tubes are added to each platform, fixed under the deck to form guide slots for the fork tines. The forklift slides its forks along the tubes, places the rock, then backs out. The tubes are screw‑mounted and can be removed after experiments, leaving a flat platform surface.

Remote control operation

Safety requirement: When flipping a 10‑ton rock, operators must stay at a safe distance to avoid injury from sudden cracking or overturning.

Solution: A wireless remote controller allows the operator to start, stop and reset the tilt from a distance. The motor has a self‑locking brake to hold the angle when power is off.